null

How To Use

Instructions on how to use X-Mist Room Sanitiser and Deodoriser

Read instructions for use before use

  1. Prepare the room by cleaning and removing anything that can cause odours, such as food leftovers or soiled substances.

  2. Remove pets and people from the area to be treated and close all windows.

  3. Shake well before use. Choose a central location on the floor for the can and place it on a clean cloth or a small towel if sprayed over.

  4. Press the button of the total drain valve directly down until it snaps into place to drain the fog.

  5. Leave the room and close the door.

  6. Place used tins in the recycling bin

Each 250 ml tin will cover a room of 5m x 5m

LARGER ROOMS REQUIRE ADDITIONAL DOSES FOR EFFECTIVE TREATMENT

Caution: Once the outlet valve button is locked, the distribution of the contents of the spray can cannot be stopped until the can is empty.

Risk

  • Extremely flammable spray can pressure vessel: Can burst when heated.

  • May cause an allergic skin reaction.

  • Causes severe eye irritation.

  • Harmful to aquatic organisms with long-lasting effects.

  • Keep out of reach of children.

  • Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition.

  • Smoking prohibited.

  • Do not spray on an open flame or other ignition source.

  • Do not pierce or burn, even after use.

  • Take off contaminated clothing and wash before reuse.

  • Protect from sunlight.

  • Do not expose to temperatures above 50 °C/122 °F.

  • Contents: propane-2-ol, ethanol, methanol

Operating Instructions

Instructions for using X-Mist Vehicle Sanitiser and Deodoriser

room

Instructions for disinfecting the air conditioner / removing odours

  1. Close all windows and start the motor.

  2. Turn on the aircon, set to recycle mode and lowest fan setting.

  3. Shake well for 30 seconds before use.

  4. Place the spray can in an upright position in the back footwell and away from obstacles.

  5. Press down firmly on the total release valve until it clicks into place, the tin will then automatically empty its contents.

  6. Exit the vehicle and close doors.

  7. After the spray can has emptied, let the air conditioner run for another 15 minutes.

  8. Open the car doors, turn off the engine and let the vapours escape completely before boarding. If any residues are present, wipe with a clean cloth.

  9. Place used tins in the recycling bin.

Caution: Once the outlet valve button is locked, the distribution of the contents of the spray can cannot be stopped until the can is empty.

Risk

  • Extremely flammable spray can pressure vessel: Can burst when heated.

  • May cause an allergic skin reaction.

  • Causes severe eye irritation.

  • Harmful to aquatic organisms with long-lasting effects.

  • Keep out of reach of children.

  • Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition.

  • Smoking prohibited.

  • Do not spray on an open flame or other ignition source.

  • Do not pierce or burn, even after use.

  • Take off contaminated clothing and wash before reuse.

  • Protect from sunlight.

  • Do not expose to temperatures above 50 °C/122 °F.

  • Contents: propane-2-ol, ethanol, methanol

Why choose X-Mist?

X-Mist is a highly effective, powerful wide-spectrum germ killer that kills and eliminates bad odors and bacteria that may be present in your rooms / space.

Its active ingredients have a proven efficacy against E-Coli, Salmonella, Legionella, Pseudomonas aeruginosa, Serratia marcescens, Typhosa, Staphylococcus aereus and Streptococcus pyogenes that may be present in the space you are treating.

A highly effective viricidal agent that inactivates all lipophilic viruses (e.g. herpes, vaccinia and influenza viruses) and many hydrophilic viruses (e.g. adeno-, entero-, rhino- and rotaviruses).

X-Mist can remain active for up to 7 days after use.

X-Mist is fully tested for biocidal efficacy according to BS EN 1276, BS EN 1650 and BS EN 14476.

Safety Data Sheet